麻豆精品人妻无码一区二区三区-麻豆精品传媒一二三区在线视频-麻豆国产精品va在线观看不卡-麻豆国产-麻豆AV蜜桃AV久久-裸体美女免费视频网站

* 聲明:《機械工程師》雜志官網網址為:www.xuriyuan.com.cn,雜志社未授權任何機構和個人接受向我刊的投稿,我刊投稿信箱為:[email protected][email protected]  
                   
  首頁 > 前沿技術 > 更多   第1頁 【共1頁】
 
盡情放松:iglidur滑動軸承實現
便攜式吊床的免潤滑支撐
2021年2月5日 0:01 來源:易格斯(上海)拖鏈系統有限公司

 

  免維護的igus工程塑料滑動軸承確保Qnux吊床的快速和簡便組裝

   Max Kitzberger夢想著能隨時隨舒適地躺著,現在他的兒子及其團隊正在將這個夢想變?yōu)楝F(xiàn)實。便攜式吊床Qnux可以收納進1.10米長的緊湊型圓筒中,僅重9千克,只需五步即可輕松完成安裝。對于折疊和移動部件的選擇,Qnux開發人員采用了由免潤滑高性能工程塑料制成的iglidur J滑動軸承。

  Kitzberger M?bel公司因其制造的家具被酒店、學生宿舍和療養院廣泛使用而聞名于奧地利。從沙發床、躺椅到成套的公用廚房,這些家具都既時尚又實用。但公司創始人仍有一個夢想沒有實現,那就是便攜式吊床。Kitzberger M?bel公司董事總經理Michael Kitzberger說:“我父親在學生時代就有了開發移動吊床的想法。因?yàn)樽诓莸亍⑸碁┖土值厣贤懿皇娣运朐O(shè)計一款可以在任何一個地方使用的吊床。” 現在他的兒子,擁有經驗豐富的開發團隊和新成立的Pondell公司的Michael Kitzberger,正在將這個想法變成現實。只需簡單的五個步驟,就可以從1.10米長的鋁制圓柱體中組裝出2米長的吊床。它的重量僅為9千克,可以放進汽車的后備箱。墊子是由抗紫外線的織物制成的。3毫米細的鋼絲繩可以確保強度,并承受高達200千克的重量。由于運動部件的軸承需要一個輕便且耐磨的解決方案,因此開發人員向運動塑料專家igus求助。在咨詢igus專家后,他們選擇了由耐磨工程塑料iglidur J制成的滑動軸承和鋁軸。這款材料已經在全球無數應用中被廣泛使用。

耐潮濕、耐腐蝕
  高性能工程塑料iglidur J的主要特點是其在鋁軸上的摩擦系數和磨損都非常低,并且吸水率很低。另外和所有igus高性能工程塑料一樣,它是耐腐蝕的。因?yàn)椴牧匣旌狭斯腆w潤滑劑,因此制成的軸承也不需要外部潤滑,避免了潤滑劑污染。此外,工程塑料滑動軸承還耐沙子、耐灰塵。因此,Qnux完全可以在海灘上、釣魚時和森林中使用,讓戶外愛好者隨時享受到舒適的躺椅。吊床還可以選配陽傘、儲物袋、杯子以及書架和托盤支架。為了爭取到首次大批量生產的資金,這家新成立的公司目前正在Kickstarter上進行眾籌活動:https://www.kickstarter.com/projects/qnux/qnux-hammock-innovation

      
使用iglidur J滑動軸承的Qnux吊床可以快速輕松地折疊。
(來源:igus GmbH)


 

本期導讀 (2020-12) 更多>>

1 腦癱患兒爬行訓練架設計及分析…姜吉光 王楚超 張文杰
Design and Analysis of a Parallel-driven Rehabilitation Robot for Children with Cerebral Palsy
4 基于探究式學習的課程教學設計…袁根華
Curriculum Teaching Design Based on Inquiry-based Learning
7 渦激振動發電裝置傳動機構優化設計…王成龍 李佳冀 王文婷
Optimization Design of Drive Mechanism for VIV Power Generator
9 面向復雜工況的板翅式換熱器封頭與翅片性能協調設計…彭翔 李登洪 姜少飛 等
Performance Coordination Design of Inlet Header and Fin in Plate Fin Heat Exchanger for Complex
Operation Conditions
13 R O V 吸泥技術研究…齊兵兵
Research on Mud Suction Technology by ROV
15 數控機床絲杠的錯流內冷結構設計與研究…李帥 郭言國
Design and Research on Spiral Internal Cooling Structure of CNC Machine Tool Lead Screw
19 新型玉米精播器設計…王健 李振華 郭俊旺 等
Design of a New Corn Precision Seeder
22 焊縫修磨機器人聚氨酯輪與鋼管的接觸建模與有限元研究…張婕 李亞穩 雷潤德
Modeling and Finite Element Study on Contact between Polyurethane Wheel of Welding Seam Repair
Robot and Steel Pipe
25 基于 Matlab 的螺桿轉子的型線分析…王殿鈞 李殿起 王金平 等
Rotor Profile Analysis of Screw Compressor Based on Matlab
28 基于均勻設計的汽車變速桿操縱舒適性研究…楊宇明 張新敏 王曉云
Research on the Control Comfort of Automobile Gear Lever Based on Uniform Design
34 基于電渦流傳感器的滑動軸承油膜厚度測量方法…牟迪 陸天煒
Oil Film Thickness Measurement Method of Sliding Bearing Based on Eddy Current Sensor
38 雙模式外骨骼結構設計與優化…馮軍 王衛辰 劉興實 等
Design and Optimization of Dual-mode Exoskeleton Structure
43 LNG 動力漁船冷能梯級利用…楊晨斌 許光映 薛大文
Cold Energy Cascade Utilization of LNG Powered Fishing Ship
45 基于 EMS 的升降電纜彈簧選擇參數研究…王永昊 鄒毅斌
Research on Parameter Selection of Lifting Cable Spring Based on EMS
48 隨機振動條件下地鐵電磁繼電器步進應力加速退化試驗研究…趙華 吳聰聰 方驊 等
Research on Step-stress Accelerated Degradation Tests of Electromagnetic Relay of Subway under Ran
dom Vibration Stress
55 一種新型滾珠絲杠副裝配與調試設備研制…張洪強 耿玉香 周鳳蘭 等
Development of a New Ball Screw Assembly and Debugging Equipment
57 滾齒工藝對熱處理畸變的影響研究…王明鏡 王炯 曹榮青 等
Effect of Hobbing Process on Heat Treatment Distortion
60 遺傳優化 BP 神經網絡在電液力伺服系統辨識中的應用…周挺 王虎
Application of BP Neural Network Based on Genetic Optimization in Electro-hydraulic Force Servo System
67 基于剛?cè)狁詈夏P偷碾妱榆嚋p速箱振動分析…伍小凱 李文強 李王英 等
Vibration Analysis on Reduction Gearbox of Electric Car Based on Rigid-flexible Coupling Trans mission Model
70 基于 SYSWELD 的 X80 管線鋼焊接接頭溫度場的數值模擬…田萬鵬
Temperature Field Numerical Simulation of X80 Pipeline Steel Welded Joint Based on SYSWELD
73 海洋平臺管線振動控制研究…房樹鋒 李福春 肖峻峰
Vibration Analysis of Pipelines on Offshore Platforms
75 多孔鈦合金切削加工參數優化試驗研究…紀飛飛
Experimental Study on Cutting Stability of Porous Titanium Alloy
79 火炮對空中目標射擊彈道解算方法分析…任華杰 張瀚 冀志軒
Analysis on the Trajectory Calculation Method of Artillery Shooting at Aerial Targets
81 面向半失能老人的無動力外骨骼分析及設計…李剛 宋振東 鄒風山 等
Analysis and Design of Powerless Exoskeleton for Semi-disabled Elderly
89 基于 Excel 深化改革《機械設計基礎》課程的研究…杜海彬 張長軍 張華瑾 等
Research on Deepening Reform of the Course “Basic Mechanical Design” Based on Excel
96 無人機氣壓彈射起飛動力學仿真分析…李德庚 周明 黃遲 等
Dynamic Simulation and Analysis on Pneumatic Catapult-assisted Take-off of UAV
100 電動鉆機信息服務系統設計…李慶福 史金紅 李娜 等
Design of Information Service System for Electric Drilling Rig
103 深水吸力樁施工技術研究…毛志豪 胡紹峰 李龍祥 等
Research on Construction Technology of Suction Pile in Deep Water
105 井下鏟運機驅動橋濕式多盤制動器的研究…唐俊輝
Research on the Wet Multi-disc Brake of the Drive Axle for the Underground LHD
108 儲能變流器降噪方案研究…潘守文 葛玉石 劉為群 等
Research on Noise Reduction Scheme of Energy Storage Converter
111 電動鉆機電視監控系統技術現狀及優化方案…史金紅 李慶福 李云鵬 等
Technical Status and Optimization Scheme of Electric Drilling Rig TV Monitoring System
114 海管直線度及橢圓度水下測量技術…高超 胡紹峰 賀佛林 等
Underwater Measurement Technology for Straightness and Ovality of Submarine Pipelines
116 某型燃機透平******級動葉蠕變持久強度有限元分析…于寧 孫立權 馮永志
Finite Element Analysis on Creep Rupture Strength of the First Stage Turbine Blade of a Certain
Type Gas Turbine
119 基于精益六西格瑪方法論降低工藝文件差錯率…郭光強 程小剛 嚴歡 等
Reducing the Error Rate of Process Documents Based on Lean Six Sigma
124 德國 DVS1612 標準在軌道車輛焊接結構疲勞評估中的應用…代魯平 白從凱 楊蕭
Application of German Standard DVS1612 in Fatigue Assessment of Welded Structure of Rail Vehicles
129 一種汽車白車身生產線中圓柱坐標機器人的運動學及仿真…鄭鋆 路書禮
Kinematics and Simulation of a Cylindrical Robot Used in the Auto BIW Production Line
134 龍門充電樁設計與研究…王樹勛 方春陽 殷帥兵
Design and Research of Gantry Charging Pile
137 海底管道帶壓開孔回接技術…王長濤 高岳松 邢廣闊
On Subsea Pipeline Tie-in via Hot Tapping Technology
140 核級三通閥閥體三孔同軸度專用量具設計…牛小歐 李洪武 卓家桂
Measuring Device Designing for Three-hole Concentricity of Valve Body for Nuclear Grade Control Valve
143 風機緊急順槳載荷分析與系統優化研究…費望龍 龔佳興 趙勇
Emergency Propeller Load Analysis and System Optimization of Wind Turbine Generator
146 關于人體起坐支撐的外骨骼裝置的結構設計…陳俊宇 宋愛平 李博皓 等
Structural Design of Exoskeleton Device for Supporting Human Sitting
153 液壓支架上升回路的 AMEsim 建模和仿真…劉曉蓮 李坤 趙雄鵬
AMESim Modeling and Simulation of Hydraulic Support Lifting Circuit
31 一種基于滾動軸承整合設計的風電行星輪內孔的磨削方法…束長林 王炯 王明鏡 等
Grinding Method of Wind Power Planetary Wheel Inner Hole Based on Integrated Design of Rolling Bearing
52 基于 Mastercam 的復雜凹模零件加工…李國榮
Machining of Complex Die Parts Based on Mastercam
64 球墨鑄鐵管件機械加工工藝及其裝備…劉善江 陳紅光
Design and Research on Spiral Internal Cooling Structure of CNC Machine Tool Lead Screw
93 一類風電太陽輪滾齒徑向進刀加工方式探討…曹榮青 束長林 王明鏡 等
Study on Radius Infeed Process Method in Wind Power Sun Gear Hobbing Process
132 裝配件襯套加工工藝方法探索…徐紅彥 舒曉君 苗奎
Study on the Processing Method of Assembly Bushing
150 單點金剛石飛切技術的縱向紋路形成機理研究及抑制措施…金波佳 張劍鋒
Research on the Formation Mechanism and Control Measures of Vertical Stripes of Single Point Dia
mond Flycutting Technology
127 某型航空發動機點火電纜金屬編織套斷裂故障分析…范旭東
Fracture Analysis on Metal Braided Sleeve of Ignition Cable for a Certain Type of Aeroengine

下期預告 (2021-01) 更多>>

1 基于三維空間機構的教學用拆裝實驗裝置設計…徐英帥 萬智輝 黃偉莉 等
Design of Disassembly and Assembly Experiment Device for Teaching Based on 3D Spatial Mechanism
4 電力推進船舶軸系沖擊響應分析…牛雨生 董良雄 楊明宇 等
Impact Response Analysis of Electric Propulsion Ship Shafting
7 核電站巡檢應急履帶機器人越障分析…李彰 朱性利 吳學洲
Analysis on Obstacle Overcoming of Emergency Tracked Robot in Nuclear Power Plant
12 一種自動攻絲試驗機的設計研發…傅夢婷 李湘生
Design and Development of an Automatic Tapping Test Machine
16 回轉減速機空行程的檢測和改進…黃春有
Detection and Improvement of Swinging Reducer Idle Stroke
19 口罩機齒輥的加工仿真與實現…祁跡 黃小峰 鄺錦祥
Machining Simulation and Realization of Tooth Roll in Mask Machine
21 振動式林果采收技術的研究現狀…陳澤斌
Research Status of Vibrating Fruit Harvesting Technology
25 六自由度機器人運動學分析…殷固密 王建生
Kinematics Analysis of 6-DOF Robot
29 VRML技術在CATIA二次開發中的應用…王亞剛 徐萬紅
Application of VRML Technology in the Secondary Development of CATIA
31 跨音速壓氣機轉子葉尖間隙流場特性研究…劉海旭 馮永志 任利
Effect of Tip Clearance Flow on Aerodynamic Performance of Transonic Compressor Rotor
34 考慮機床結合面的立式加工中心動態特性分析…呂超超 王瑞超 周俊榮 等
Dynamic Characteristics Analysis of Vertical Machining Center considering Machine Tool Joint Surface
38 錐齒輪力學性能研究…王棟 李寶良
Study on Mechanical Properties of Bevel Gear
43 車內酒精濃度檢測與安全控制系統…曾麗霞
In-car Alcohol Concentration Detection and Safety Control System
46 一種便攜式多功能小型充電裝置的電路設計…趙艷新
Circuit Design of a Portable Multifunctional Small Charging Device
49 鎂合金大塑性變形軋制技術研究進展…胡冬 梅靜 文仁興
Research Progress of Magnesium Alloy Severe Plastic Deformation Rolling Technology
51 基于Protcol Buffer的數控程序管理系統研究…劉強 郭東亮 趙怡 等
Research on NC Code Management System Based on Protcol Buffer
54 電動鉆機系統設備信息識別系統設計…史金紅 李慶福 廖剛 等
Design of Equipment Information Recognition System for Electric Drill System
56 基于拓展杠桿法的8速行星齒輪機構的設計…文強
Design of 8-speed Planetary Gear Mechanism Based on Extended Lever Method
60 基于試驗分析的CRH2A動車組電茶爐開關電源常見故障修復方法研究…王化新 李知賢 韓志遠 等
Research on the Common Fault Repair Method of Switching Power Supply of Electric Tea Stove in CRH2A EMU Based on Test Analysis
63 地鐵用公鐵兩用車輛鐵路走行裝置設計與研究…張寧
Design and Research on Running Device of Road-Railway Dual-Purpose Vehicle Used for Metro
66 基于ANSYS的前移式叉車門架小車優化設計…鄭尚敏
Optimization Design of Reach Truck of Mast Support Based on ANSYS
69 電動鉆機動力系統冗余設計…李慶福 史金紅 周發學 等
Redundancy Design of Power System for Electric Drilling Rig
71 涂層技術替代耐蝕合金接箍鍍銅的可行性研究與實現…駱敬輝 陳玉鵬 王旭 等
Feasibility Study and Implementation of Coating Technology Instead of Copper Plating
on Anti-Corrosion Alloy Coupling
74 脫重真空塔填料硫化亞鐵自燃案例及控制方法…劉家懿 范旺軍 竺寧
Case and Control Method of Ferrous Sulfide Autoignition in De-heavy Vacuum Tower
76 一種艦載伺服穩定平臺的結構設計…毛雨輝 張進
Structural Design of a Shipborne Servo-stabilized Platform
78 加工中心加工垂直度工作精度的誤差分析…丁巖 李海 郝小忠
Error Analysis on the Working Accuracy of Machining Center’s Verticality
81 低溫鉆機輪軌移運裝置應用現狀及技術分析…王文超 侯敏 郭曉虎 等
Application Status of Wheel-track Transportation Device for Low-temperature Drilling Rig
85 宏程序指令在非圓曲線數控加工中的應用…曹陽 劉心宇
Application of Macro Program Instruction in NC Machining of Non-circular Curve
88 激光鉆井技術進展及其關鍵技術…閆靜 王德貴 左永強 等
Development Status and Key Technologies of Laser Drilling Technology
91 工廠空氣凈化裝置的設計與研究…林鐘衛 王琴 羅準 等
Design and Research of Factory Air Purification Equipment
94 基于ARIZ理論微型螺釘取放卡位的創新設計…鐘庭進 羅梓欣 胡雙飛 等
Innovation Designs for Pick-up and Placement of Microscrew Based on ARIZ Theory
97 一種六輪機構通過梯形障礙物的振動分析…吳楠
Vibration Analysis of a Six-wheel Mechanism Passing through a Trapezoidal Obstacle
100 卷揚減速機卷筒止口同軸度檢測裝置設計…張二莉
Design of the Measuring Device for the Coaxiality of the Winding Drum of the Hoist Reducer
102 車輛門系統的單向逆止離合鎖閉機構…王際成 林會明 張海國 等
One-way Backstop Clutch Locking Mechanism of Vehicle Door System
105 液壓油缸產品的成組化設計與制造…石國玲
Group Design and Manufacture of Hydraulic Cylinder Products
107 雙向大跨距平移海洋修井機配管系統技術研究…郭小艷 武衛衛 蔣合艷 等
Research on Piping System of Bi-directional and Long-span Translation of Offshore Workover Rig
109 黃山西海大峽谷觀光纜車液壓制動系統安全性分析…劉爭輝
Safety Analysis of Hydraulic Braking System for Sightseeing Cable Car in Xihai Grand Canyon of Huangshan Mountain
113 一種防止閥門自關閉鎖定裝置的研究設計…顧祥武 湯馳 欒俊 等
Research and Design of a Locking Device to Prevent the Valve from Closing
115 適用于嚴苛環境的儲能變流器散熱方案研究…周力民 張海龍 劉博嘉 等
Study on Heat Dissipation of PCS Suitable for Harsh Environment
119 車輛質心位置測量方法研究…崔愛蓮 關士成 凌山珊 等
Research on Measurement Method of a Vehicle Centre-of-mass Position
122 推靠式垂直鉆井工具機械系統關鍵技術分析…惠坤亮 吳小雄 游娜 等
Key Technologies Analysis on Mechanical System of Push-the-bit Vertical Drilling Tool
125 工程機械液壓系統容積調速回路分析…徐成東
Volume Speed Regulation Circuit Analysis for Hydraulic System of a Construction Machinery
132 基于某風電機組運輸工裝螺栓有限元建模方法的對比分析…邵振威 李有亮 趙春雨
Comparative Analysis Based on the Finite Element Modeling Method of a Wind Turbine Transportation Tool Bolt
143 沖壓空氣渦輪艙門聯動機構動力學仿真及優化…杜鑫 盧岳良 陳建偉
Dynamics Simulation and Optimization of Door Linkage Mechanism of Ram Air Turbine
127 汽車軟工裝試制及夾具的開發…李達
Development of Automobile Soft Tooling Trial Production and Fixture
130 基于車螺紋原理卷制螺旋彈簧…趙云
Coil Spring Based on the Principle of Thread Turning
135 風電齒輪螺旋角修形方式的探討…王明鏡 王炯 曹榮青 等
Discussion on the Helical Angle Modification Method for Wind Power Gear
137 高硬度花鍵滾銑復合加工方法研究…束長林 王炯 王明鏡 等
Research on Hobbing and Milling Compound Machining Method of High Hardness Spline
140 軋制極薄材料的Cr5型鍛鋼工作輥及其制備方法的研發…王德山 陳銘宏 陳尤旭
Preparation Method Research and Development of Cr5 Forged Steel Work Roll for Rolling Very Thin Material
146 某異形鉤子零件快速加工工藝研究…鄧文星 宋燕林 閆佳佳 等
Research on Rapid Processing Technology of a Specially-shaped Hook
151 汽車車身快速試制與質量改進…寧燕
Rapid Trial Manufacture and Quality Improvement of Automobile Body
149 某汽輪機振動大及低壓內缸裂紋原因分析與處理…黃建強 朱熹 彭金龍 等
Cause Analysis and Treatment of Cracks in the Inner Casing of a Steam Turbine with High Vibration and Low Pressure
154 某型飛機座艙蓋操縱作動筒損傷分析及應對…皮月亮 祖揮程 李永彬 等
Damage Analysis and Countermeasures of a Certain Aircraft Canopy Operating Actuator Cylinder

 
友情鏈接
  更多>>
國內刊號:CN23-1196/TH | 國際刊號:ISSN1002-2333 | 郵發代號:14-53 | 單冊定價:20.00元
投稿熱線:0451-82120966 | 服務熱線:0451-82127726 | 廣告熱線:0451-82127726
雜志社地址:哈爾濱市香坊區文治頭道街30號 | 郵編:150040 | E-mail:[email protected]
《機械工程師》雜志社 版權所有 | 黑ICP備13003457號
主站蜘蛛池模板: 手机看片福利日韩 | 日本高清视频网站www | 天天综合久久 | 爱爱夜夜爽成人夜夜爽 | 天无日天天射天天视 | 亚洲色视频 | 精品久久久久中文字幕日本 | 国产人免费人成免费视频 | 一级做a爰性色毛片 | 台湾午夜剧场 | 成年人深夜福利 | 亚洲毛片| 桃花岛精品亚洲国产成人 | 一二三四免费观看视频中国 | 日本在线观看免费 | 91寡妇天天综合久久影院 | 欧美亚洲第一区 | 日本在线一区 | 草草影院国产第一页 | 亚洲综合伊人色一区 | 中文毛片 | 福利视频第一区 | 巨乳天堂 | 精品久久久久久中文 | 国产成人在线精品 | 亚洲欧美日韩高清 | 亚洲图片一区二区 | 日本乱妇18日本乱妇18p | 中国一级特黄真人毛片 | 久青草久青草高清在线播放 | 午夜啪 | 99青青青精品视频在线 | 欧美成人精品免费视频网站 | 激情国产白嫩美女在线观看 | 国产v精品成人免费视频400条 | 日韩视频www | 最近的中文字幕在线看 | 亚洲午夜在线视频 | 欧美国产日韩一区二区三区 | 一区二区三区免费视频观看 | 日本一级爽快片淫片高清特级 |